Hou Wen

Product Introduction

Dr. Baowa series of intelligent lighting power savers use advanced electromagnetic voltage regulation and electronic induction technology to monitor and track the power supply in real time, automatically and smoothly adjust the voltage and current amplitude of the circuit to improve lighting. The extra power consumption caused by the unbalanced load in the circuit increases the power factor and reduces the operating temperature of the lamps and lines, thereby achieving the purpose of optimizing the power supply. This intelligent product provides an optimal output to the lamps while ensuring that the lamps can work normally. The lighting power can not only reduce the lighting glare caused by overvoltage, make the light emitted by the light softer, make the lighting distribution more uniform, but also save a lot of power energy. The power saving rate can reach %. It can be used in lighting and hybrid circuits. It has strong adaptability and can work continuously and stably in various harsh power grid environments and complex load conditions. It will also effectively extend the life of lamps and reduce maintenance costs

Principle of power saving
/>
Voltage levels vary across China. Therefore, when designing various types of lamps, in order to ensure that they can start and emit light normally under different circumstances, their design voltage is generally lower than the standard phase voltage, while the power system is Convenient power transmission often increases the transmission voltage, causing the actual operating voltage of lighting fixtures to be higher. These excess voltages not only fail to allow the lamps to work more efficiently, but also have two major negative effects: wasting electricity and shortening the life of the lamps.

Aiming at the fatal flaw of the existing lighting circuit, Dr. Paula's series of intelligent lighting power savers use electromagnetic induction to optimize the input voltage of the power supply system, and use direct conversion technology to adjust the voltage and transmit it to the lighting load. The voltage is the optimal value for the design voltage of the lamp, which not only saves electricity, but also extends the life of the lamp, and also ensures the triple purpose of the lighting standard requirements.

According to the basic electrical principle/R, assuming that the voltage applied to the lamp is , and the impedance of the light is set to a fixed value resistor R, then the power it consumes under the original voltage is The power consumed will decrease with the square of the voltage. Its active power-saving rate is expressed as:

%(/%

As far as fluorescent lamps are concerned, sufficient rated voltage is only needed to excite the fluorescent material when starting, so that the lamp Emit light. Within the preset time, after the intelligent system senses that the power of the lamp has been fully exerted, it automatically adjusts the load voltage, and the lamp can switch to the power-saving mode, and the power saver enters the automatic online detection state at the same time. According to a large number of experiments The results show that every time the power supply voltage decreases by %, the illumination of the fluorescent lamp only decreases by about %, and the human eye's perception of light is a logarithmic relationship: that is, when the illumination of the light decreases by %, the human visual perception of brightness only decreases by %, so it is reasonable The slight change in illumination caused by reducing the input power of the lamp is almost imperceptible to the human eye, but it has positive significance in extending the life of the lamp and reducing maintenance costs.

Product Advantages

●Intelligent automatic control system

Soft start/full voltage start: Users can choose soft start or full voltage start according to different types of lamps to ensure that the lamps can start normally and extend their life. The time is adjustable.

Highly intelligent power saving: According to different lighting fixtures and their working conditions, the power saving rate can reach %%.

Stabilized and constant voltage: saving The electrical appliance dynamically tracks the input voltage and automatically adjusts the power-saving gear to make the lamp work in a constant voltage state to ensure the normal operation of the lamp and achieve the maximum energy-saving effect.

Multi-layer protection function: with low current bypass Low voltage bypass overload (overcurrent) bypass fault automatic bypass and alarm function, and these functions can be turned on/off by the user through the DIP switch.

Bypass system: power saving and bypass dual circuit.

Manual/automatic adjustment: Both the bypass and power-saving levels can be adjusted manually and automatically, ensuring the normal operation of the lighting power supply system even if the power saver fails.

Automatic memory recovery function after power outage: Automatically restore all settings before power outage.

Remote control interface: With computer and remote automation control R or R interface, it can be used for remote control upgrades, and On-site computer modification program.

Optional functions: multi-period voltage regulation function, celestial clock, automatic tracking control switch time function, anti-theft alarm function, etc.

Effectively extend the use of electric light sources Lifespan

Does not produce any harmonic pollution to the power grid, optimizes the power grid, and expands capacitance margin.

Effectively filters current fluctuations and impacts, reduces reactive power losses, optimizes the power grid and Various operating indicators of lighting equipment.

Reducing the operating temperature of lamps and promoting conservation of air-conditioning energy can extend the service life of lamps by %.

●Low-risk and high-return investment, Significantly reduces operating costs

Good performance-price ratio, system service life of 100,000 hours.

Users can recover the investment cost of energy-saving equipment in about ~ months.

After recovering the cost of energy-saving equipment, long-term profits will be created and the economic benefits will be significant.

●Easy to install and maintain

It can be installed directly on the power supply system line without changing the line, and it is easy to install and adjust.

Intelligent control, dynamic tracking, automatic power saving, no need for debugging, no need for dedicated operation and management.

Implementing optimized process flow and strict quality inspection, it is safe and reliable, and easy to operate and maintain.

Beautiful appearance and compact size, which does not affect the unified layout of the installation site.

Application scope:

Suitable for energy saving of lighting loads such as hotels, supermarkets, banks, schools, exhibition halls, parking lots, playgrounds, shopping malls, office buildings, landscape lights, advertising light boxes, street lights, various factories, etc.< br// Hybrid lighting systems with long-term voltages above rated voltage.
Dr. Baowa series of intelligent lighting power savers use the latest microcomputer-controlled electromagnetic voltage regulation technology, which can not only significantly save the electricity bill of the electricity consumption unit, but also extend the service life of the lamps, thus saving a lot of maintenance costs and operating hours. It opens up a space for saving among the inherent expenses of the enterprise, further reduces the operating cost of the enterprise, and lays a good and solid foundation for the continuous development of the enterprise.

In order to enable enterprises to truly achieve the purpose of saving electricity and energy, our company sincerely recommends our Dr. Baowa series of intelligent lighting power savers to your company:

The product has the following characteristics :

Small in size, easy to operate and low in maintenance costs.

Easy to install, no need to change the original lighting circuit, no need to change the original power consumption time.

Save electricity consumption by more than % (directly save electricity bills)

Prolong the service life of light tubes (significantly reduce the maintenance and replacement costs of lamps)

The service life of the equipment can be more than 10,000 hours.

Low investment, quick return (about ~ years)